The drivers who operate the modified loader Rapid Impact Compactor are generally loader drivers, who are very attribute to the internal operation of the loader, so there is no need to worry too much. The operation of the loader Rapid Impact Compactor is very simple. At the same time, the loader Rapid Impact Compactor has a PLC system, which can also monitor the compaction remotely, and can adjust the compaction frequency, compaction times, compaction intensity and other parameters.

The drivers who operate the modified loader Rapid Impact Compactor are generally loader drivers, who are very attribute to the internal operation of the loader, so there is no need to worry too much. The operation of the loader Rapid Impact Compactor is very simple. At the same time, the loader hydraulic tamping machine has a PLC system, which can also monitor the tamping situation remotely, and can adjust the tamping frequency, tamping times, tamping strength and other parameters, which is very convenient and fast. Of course, after you purchase the machine, professional after-sales engineers will come to help you install and debug the equipment. At the same time, they will also teach the driver how to operate the loader Rapid Impact Compactor by hand.

Operating procedures of loader Rapid Impact Compactor:

1. Before driving and working, the operator should be familiar with the various performances of the loader Rapid Impact Compactor Construction Technical maintenance Operation mode And operate as required.

2. Passengers are not allowed in other places except the cab.

3. When pouring the loader Rapid Impact Compactor into the vehicle, the loader Rapid Impact Compactor must be raised to a height that does not touch the trunk baffle. It is strictly forbidden to contact the trunk with the bucket, and it is strictly forbidden to cross the bucket from the top of the cab.

4. Select automatic deceleration when going downhill, and do not step on the clutch pedal to prevent power cut-off and pulley accident.

5. Immediately shut down the loader Rapid Impact Compactor for inspection after wading. If it is found that the brake failure is caused by soaking, continue braking and remove the water in the brake pad with heat, so as to recover the brake as soon as possible.

6. When the loader Rapid Impact Compactor is working, no one can stand in front of it. When driving, the loader Rapid Impact Compactor cannot carry passengers.

7. When working, it is strictly prohibited to stand under the shovel arm, and irrelevant personnel and other machinery are strictly prohibited to work and pass here.

8. It is strictly forbidden to select high gear for loader.

9. When the operator leaves the driving position, be sure to turn off the loader Rapid Impact Compaction and cut off the power supply.

Operation precautions of loader Rapid Impact Compactor

1. After entering and leaving the construction range of the Rapid Impact Compactor, there should be obvious stability signs to prohibit vehicles and personnel from entering and leaving, and traffic stability countermeasures should be taken. During night construction, lighting and night warning signs that meet the operating regulations must be set up.

2. Construction sewage discharge Control construction noise Control the discharge rate of solid waste from construction to reach the standard, and the vegetation restoration rate of temporary land occupation is high.

3. Arrange the construction time scientifically, reduce the impact of noise and vibration on the environment by Rapid Impact Compactor, and control the noise generated by mechanical operation within the specified allowable range.

4. Take all reasonable countermeasures to protect the internal and external environment of the site and prevent smoke and dust caused by construction operations Hazardous substances Noise and other environmental pollution, or other personal injury or economic losses caused by environmental pollution.

5. When the Rapid Impact Compactor works, it should be equipped with sufficient sprinklers. When the dust is serious, it should be sprinkled to reduce the dust pollution along the construction line.